The QSS-35 PLUS series
New compact minilabs that meet your individual needs

Noritsu Koki is pleased to announce the QSS-3501i PLUS, QSS-3501 PLUS, and QSS-3502 PLUS, which are innovative additions to the highly popular QSS-35 series. These new compact minilabs, which are released in late June 2007, will be proudly displayed at PMA 2007 (held from the 8th to the 11th of March in Las Vegas, USA) as well as PIE 2007 (held from the 22nd to the 25th of March in Tokyo, Japan).

The new QSS-3501i/3501/3502 PLUS is a user-friendly, efficient, cost-effective minilab system that combines the same basic features as the QSS-35 series with even more features that meet a wide variety of customer needs, such as the ability to form a network connecting multiple printers, and a versatile layout in which the operation section (PC, monitor, scanner etc.) can be separated from the printer.

Features
High quality print engines
Noritsu Koki’s laser engine is used for the QSS-3501/3502 PLUS and an iBeam engine is used for the QSS-3501i PLUS. Both produce vivid, high quality prints of 300dpi.

Flexible layout
You can choose which side to operate the machine from, and the components can be separated and placed in various layouts, giving you more freedom to use the system in a way that best fits your available floor space. Furthermore you can also adjust the height by raising the table up to 20cm.

“AccuSmart™” image processing technology employed
Noritsu Koki’s AccuSmart™ technology enables you to easily portray the natural beauty of the scene as viewed by the photographer when the picture is taken. This advanced technology not only provides superb quality for well photographed images, it also applies appropriate correction to less-than-perfect shots, resulting in extremely high quality prints regardless of the image source.

A selection of new film scanners to choose from (film scanners sold separately)
With the QSS-35 PLUS series, you have three new film scanners to choose from. The HS-1800 supports a wide variety of film including 120, and the LS-600/LS-1100 support only 135 and IX240 film. You can also choose not to add a scanner, and instead use the QSS-3501i/3501/3502 PLUS as a stand-alone printer.
Scanning capacity LS-600 600 frames/hr, LS-1100 1100 frames/hr, HS-1800 1800 frames/hr

New operation software “EZ Controller” (sold separately)
The EZ Controller gives you the ability to easily perform many important functions such as PJP, value-added print creation, order management, and image correction. Furthermore, pictures are used to explain many of the instructions for start up checks and shut down checks, and warning messages are easy to locate and read.

Setup prints taken care of automatically
The colorimeter is built into the processor. This enables the setup print to be automatically inserted into the colorimeter after it comes out of the dryer unit, eliminating the need for manual operations. Also, the QSS-35 PLUS series has a new option called the “Control Strip Auto Loading Unit” that automatically processes control strips.

Interrupted orders signified by LED lamp
LED lamps on the order sorter (Standard for QSS-3502 PLUS. Option for QSS-3501i/3501 PLUS.) are used to indicate which orders have been interrupted and which print trays the interrupted orders are in.

Rapid processing
When purchasing a QSS-35 PLUS minilab you can specify a rapid processing system which uses specified chemicals to achieve a reduced processing time, opening the door for an on-the-spot print service where the customers can drop off their media and pick up their prints a single visit.
Note Only specified chemicals and paper can be used.

Prints up to 914.4mm (36 inches) long
The standard maximum paper advance length is 610mm, and this can be extended to 914.4mm if you add an option, making it possible to provide a wide variety of print services.
QSS-3501/3502PLUS only

Dual/Triple Magazines (Factory option)
The dual and triple magazine systems enable labs that make various size prints to set multiple paper sizes at the same time. Magazine changes are quick and easy.

An array of options
The QSS-35 PLUS series supports the MD-2 Unit, Bravo II/Rimage CD writers, DVD writing and many other options to provide a scalable system that allows you to add new services as needed.

Can be converted into a one pass system (Optional attachment units required)
The film processor (QSF-T15) and the scanner (LS-600/LS-1100) can be combined into a single unit enabling the film to be automatically fed into the scanner as it comes out of the processor. This all-in-one configuration automates the entire process from 135 film development to printing, enabling unattended operation.
Note One pass processing is only possible with 135 film.

The QSS-3701/3702/3703
New multi-function minilabs with scalable network features

Noritsu Koki Co., Ltd. is pleased to announce its latest line of digital minilabs, the QSS-3701, QSS-3702, and QSS-3703. These 3 new multi-function high-performance models will be marketed to a wide range of customers including photofinishers and photo studios.

The QSS-3701/3702/3703 is a user-friendly, efficient, multi-function minilab system that provides the flexibility you need to respond to the diverse customer demands. It combines the same basic features as the popular QSS-32 series with the following two new features so as to meet an even wider variety of customer needs.

1. The components of the operation section (PC, monitor, scanner, etc.) can be separated, enabling you to place them on the table of your choice, or in any layout you like.

2. Can be used as a network printer. It is possible to use the QSS-37 minilabs in a network with multiple input devices and/or multiple printers.

Features
High quality print engine
A laser engine is used for the QSS-3701/3702/3703 to produce vivid, high quality prints of 300dpi.

“AccuSmart™” image processing technology employed
Noritsu Koki’s AccuSmart™ technology enables you to easily portray the natural beauty of the scene as viewed by the photographer when the picture is taken. This advanced technology not only provides superb quality for well photographed images, it also applies appropriate correction to less-than-perfect shots, resulting in extremely high quality prints regardless of the image source.

A selection of new film scanners to choose from (film scanners sold separately)
With the QSS-37 series, you have three new film scanners to choose from. The HS-1800 supports a wide variety of film including 120, and the LS-600 (600 frames/hr) / LS-1100 (1,200 frames/hr) support only 135 and IX240 film. You can also choose not to add a scanner, and instead use the QSS-3701/3702/3703 as a stand-alone printer.

New operation software “EZ Controller” (sold separately)
The EZ Controller gives you the ability to easily perform many important functions such as PJP, value-added print creation, order management, and image correction. Furthermore, pictures are used to explain many of the instructions for start up checks and shut down checks, and warning messages are easy to locate and read.

Setup prints taken care of automatically
The colorimeter is built into the processor. This enables the setup print to be automatically inserted into the colorimeter after it comes out of the dryer unit, eliminating the need for manual operations. Also, the QSS-37 series has a new option called the “Control Strip Auto Loading Unit” that automatically processes control strips.

Interrupted orders signified by LED lamp
LED lamps (Standard) on the order sorter are used to indicate which orders have been interrupted and which print trays the interrupted orders are in.

Rapid processing
The QSS-37 series supports rapid processing using a combination of Fujifilm CP-49E chemicals and Fujifilm Color paper to provide a high quality one-stop print service where the customers can place their order and pick up their prints in the same visit.
Note Only specified chemicals and paper can be used.

Prints up to 914.4mm (36 inches) long
The maximum paper width is 305mm (12 inches) and the maximum paper advance length is 914.4mm (36 inches), making it possible to provide a wide variety of print services.

Triple/Quad Magazines (Factory option)
The triple and quad magazine systems enable labs that make various size prints to set multiple paper sizes at the same time. Magazine changes are quick and easy.

An array of options
The QSS-37 series supports the MD-2 Unit, Bravo II/Rimage CD writers, DVD writing and many other options to provide a scalable system that allows you to add new services as needed.